Type P32 Regulator

Type P32 Adjustable Precision Gas Pressure Regulator is a reliable precision unit designed for liquefied petroleum gas applications where a precise control of flow is needed. Test data for the Type P32 regulator shows excellent performance characteristics compared with those of similar units presently on the market. This regulator is generally superior in regulated pressure vs. flow, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, this regulator has, a die-cast aluminum housing, and is finished with vinyl paint (which resists scratching, weathering and other physical abuse), then is pressure and leak tested prior to shipment from the factory.

Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. Maximum supply pressure is 250 psig. Available output pressure ranges are 0-10 psi, 0-30 psi, 0-60 psi, and 0-120 psi.

The Type P32 regulator has a 60-mesh 304 stainless steel screen to block foreign particles from entering the output stream. The unit is bubble tight, non-relieving, and has been listed with UL, AGA, and CGA.

The Type P36 Preset Tamper Resistant Precision Gas Pressure Regulator is a reliable fixed output precision unit for liquefied petroleum gas applications where a precise control of flow is needed. The P36 is preset at the factory, based upon the users input and output requirements. Test data for the Type P36 regulator shows excellent performance characteristics compared with those of similar units presently on the market. This regulator is generally superior in regulated pressure vs. flow, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, this regulator has a die-cast aluminum housing, and is finished with vinyl paint (which resists scratching, weathering and other physical abuse). It is then pressure and leak tested prior to shipment from the factory.

Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The P36 is equipped with a tamper resistant bonnet assembly that prevents inadvertent field adjustment. Maximum supply pressure is 250 psi. Output pressure ranges available are 0-20 psi, 20-40 psi, and 40-60 psi.

The Type P36 regulator has a 60-mesh 304 stainless steel screen to block foreign particles from entering the output stream, in addition the Type P36 is a tamperproof regulator. The unit is bubble tight, non-relieving, and has been listed with UL, AGA, and CGA.