Type P32 Regulator

Bellofram Type P32 Adjustable Precision Gas Pressure Regulator is a reliable precision unit designed for liquefied petroleum gas applications where a precise control of flow is needed. Test data for the Bellofram Type P32 regulator shows excellent performance characteristics compared with those of similar units presently on the market. This regulator is generally superior in regulated pressure vs. flow, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, this regulator has, a die-cast aluminum housing, and is finished with vinyl paint (which resists scratching, weathering and other physical abuse), then is pressure and leak tested prior to shipment from the factory.

Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. Maximum supply pressure is 250 psig. Available output pressure ranges are 0-10 psi, 0-30 psi, 0-60 psi, and 0-120 psi.

The Bellofram Type P32 regulator has a 60-mesh 304 stainless steel screen to block foreign particles from entering the output stream. The unit is bubble tight, non-relieving, and has been listed with UL, AGA, and CGA.

The Bellofram Type P36 Preset Tamper Resistant Precision Gas Pressure Regulator is a reliable fixed output precision unit for liquefied petroleum gas applications where a precise control of flow is needed. Bellofram Type P36 is preset at the factory, based upon the users input and output requirements. Test data for the Bellofram Type P36 regulator shows excellent performance characteristics compared with those of similar units presently on the market. This regulator is generally superior in regulated pressure vs. flow, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, this regulator has a die-cast aluminum housing, and is finished with vinyl paint (which resists scratching, weathering and other physical abuse). It is then pressure and leak tested prior to shipment from the factory.

Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and "forgives" dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The P36 is equipped with a tamper resistant bonnet assembly that prevents inadvertent field adjustment. Maximum supply pressure is 250 psi. Output pressure ranges available are 0-20 psi, 20-40 psi, and 40-60 psi.

The Bellofram Type P36 regulator has a 60-mesh 304 stainless steel screen to block foreign particles from entering the output stream, in addition the Type P36 is a tamperproof regulator. The unit is bubble tight, non-relieving, and has been listed with UL, AGA, and CGA.

The Bellofram Type P37 Regulator is designed for liquefied petroleum gas applications where a precise control of flow is needed. This regulator offers high forward flow, low droop, high accuracy, and fine adjustment sensitivity. The use of a Bellofram pre-convoluted rolling diaphragm provides greater sensitivity and improved accuracy from a constant effective area. In addition, the Bellofram Type P37 offers a balanced pintle design, which eliminates unsteady changes in flow characteristics, compared to more expensive units available in the industry.

Careful design and quality materials throughout assure long, trouble-free operation. Designed to be Bubble Tight and Non-relieving the unit does not leak or consume any air or gas. The rugged die-cast aluminum bonnet and body assure safe operation. The Bellofram Type P37 is designed to withstand harsh and abusive environments thanks to Bellofram's conversion coating of all cast components. The Bellofram Type P37 offers the same flow rates as the current market suppliers at 110 scfm (16.5 Mbtu/hr.).

The Bellofram Type P38 High-Flow Regulator is designed for liquefied petroleum gas applications where a precise control of flow is needed. This regulator offers very high flow, low droop, high accuracy, and fine adjustment sensitivity. The use of a Bellofram pre-convoluted rolling diaphragm provides greater sensitivity and improved accuracy from a constant effective area. In addition, the Bellofram Type P38 offers a patent pending balanced pintle design, which eliminates unsteady changes in flow characteristics, compared to more expensive units available in the industry.

Careful design and quality materials throughout assure long, trouble-free operation. Designed to be Bubble Tight and Non-relieving the unit does not leak or consume any air or gas. The Bellofram Type P38 is designed to withstand harsh and abusive environments thanks to Bellofram's conversion coating of all cast components. The Type P38 has a large flow orifice and can achieve flow rates of well over 200 SCFM.

The Bellofram BelGAS P039 regulator selection is the largest of its type in the industry. We offer this regulator in three different materials, one of which will ideally suit your application AND your budget. ALL of the P039's are offered with a minimum of five different spring ranges, with an option for a sixth range (500 psig), on our Brass and Nickel plated versions. Our broad selection of outlet pressure spring ranges allows more precise regulation of downstream pressure, hence, better process control. Piping designs can be simplified by using any one (or all) of the 3 outlet ports that come standard on the regulator.

The Bellofram BelGAS P039 is the ONLY regulator of this type, which has 3 outlet ports. To enhance the versatility of this regulator further, we provide you with a choice of seat materials that allows the designer to custom fit the seat material with the application. Each seat is mounted in a block that can be rotated a total of 4 times to increase the service life of the regulator. Capable of regulating inlet pressures of up to 5500 psig, the Bellofram BelGAS P039 regulator should be your first choice as a first-cut regulator.

 BelGAS’ General Purpose P50 & P50 NACE Filter Regulators are reliable precision units designed for instrumentation and general purpose use in both standard environments (P50), and corrosive environments (P50 NACE). The P50 NACE complies with NACE material requirement MR0175 for sulfide stress cracking resistant metallic material for oil field equipment.

Test data for these regulators show excellent performance characteristics compared with those of similar units presently on the market. These BelGAS regulators are generally superior in regulated pressure vs. flow, forward-to-reverse flow offset, supply pressure sensitivity, repeatability and stability. Ruggedly designed and constructed, the regulators have housings of die cast aluminum. The Bellofram P50 Regulator is finished with vinyl paint (which resists scratching, weathering & other physical abuse), while the Bellofram P50 NACE is finished with epoxy paint for added protection. Both models are pressure and leak tested prior to shipment from the factory.

The full flow gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The P50 regulators include a unique self-cleaning 40 micron nylon mesh filter (316 stainless steel in the P50 NACE) that can be easily removed.